Salt Lake City Nissan VQ37VHR Tuning

Salt Lake City’s Nissan tuning solution.  EcuTek based tuning for the G37 and 370z platform.  RaceRom features add a host of powerful features to the ecu.  Calibration of the features help to get the most out of the platform.  Here are some of the new RaceRom features:

ProECU Updates that coincide with the RaceROM Phase 2 release:
  • Fully defined Variable Timing Control (VTC) – Set the VTC angle at idle, overrun and on full load
  • Fully defined Variable Valve Event Lift (VVEL)  – Set the VVEL angle at idle, overrun and on full load
  • Knock control per cylinder – Log and adjust the knock limit for each cylinder
  • Throttle and torque control – Torque limits and full pedal to throttle control
  • Detailed Fuel Injector control – Injector size, lag time and firing angle
  • Overrun fuel cut – Control when the fuel injectors restore
  • MAF Sensor rescaling – Rescale for new intakes without upsetting the engine load
  • Cruise control – Adjust the maximum target and set speeds
  • Radiator fan control – Adjust the fan duty cycle
  • Gear Ratios – Correct for new gears or final drives

Latest additional RaceROM Phase 2 features:

  • Map Switching – Rev counter indication of the four different map switch modes
  • Flat Foot Shift – Full throttle gear changes (Manual Transmission models only)
  • Speed Density – MAP sensor based tuning with VVEL compensation
  • RaceROM Controller – Use the cruise control switch gear for adjusting calibration
  • Knock Warning – Check engine light flashes when knocking is detected                        
  • Per Gear Rev Limit – A different rev limit in each gear        
  • Custom Maps – Create a map to do almost anything!            
  • Launch Control – Adjustable Launch RPM using the cruise control (Manual Transmission models only)
  • Traction Control – Adjustable traction control using custom maps   
  • Boost Control – Closed loop boost control using custom maps    
  • Flex-Fuel – Ethanol flex-fuel tuning using custom maps      
  • AFR Control – Closed loop target AFR control using custom maps
  • Fail-Safe – Protect the engine from any dangerous situations
  • Gauge Hijack – Display lambda, AFR, fuel trims or ethanol content on the oil temp gauge